CH
EN

PRODUCT CENTER
Product
PCB equipment
PCB Accessories

PIN high frequency f..

Equipment principle: High frequency fusion machine is the principle of electromagnetic induction heating, so that the fusion zone of each layer is uniform and at the same time, the semi - curing film (PP) The inner layer is fused together with the clamping force of the fusion head. PIN dual table positioning, high capacity, easy to operate; The high uniformity of heating, the thickness of the plate is not affected by the thickness of the plate (conventional plate thickness in the 12MM fusion effect is good); Energy saving can only be triggered after the heating and energy concentration, and the electrical heating can save energy about 60%-70%; Efficient fusion within the inner layer from outside to separate simultaneous heating without heat conduction is rapidly warming; Operation is simple and convenient fuse head number according to the customer demand configuration, not only to ensure that the binding force of large size full page and in the replacement of products of different size adjustment is very convenient; The plate surface and the pressing plate are formed by the combination of the special material design and the small volume energy concentration, so that the surface and the pressing plate are provided with narrow groove, thereby ensuring the product to be formed after lamination; And improve the material utilization rate according to the specific circumstances of narrow minimum edge can be design to about 5-6mm, and can design into the grid to prevent pressing sideslip fusion area is small. Board size: 12 "x 12" - 26 "x 30" Fusion thickness: 12 mm maximum, special configuration can also be large. Fusion of copper area: recommended for 5-8*22mm solid copper grid area or region Fusion time: Programmable Cooldown: Programmable

More

Single tower of copp..

Machine materials all use SUS304 stainless steel; Filtration capacity, can be treated wastewater 35 - 100L/min; The filtration effect is good, can handle more than 10 um of copper powder, filtered copper concentration was 10 ~ 50mg/L; Simple operation, the operation to remove the copper powder by only 10 - 15min; Easy to clean, the compressed air can be in the moment and make solid copper dehydration; Can match any brand grinding machine; Applicable process: internal / external D/F pre-treatment, PTH pre-treatment, S/M pre-treatment; Recycled water, save water, reduce cost; Automatic pressure alarm function, replace the filter bag to remind. Filter volume: 70~150L/35~100L/min Capacity: 35L/70L Power: 1.5KW/4.4KW Running weight: 300KG/390KG

More

High speed volcanic ..

According to customer's different process requirement, make the equipment and equipment capability to meet the production requirement; Combined design production speed: 4-5m/min production; Chinese operator interface, the program can be customized according to customer requirements; with human nature, friendly alarm display function, the specific issues at a glance, Party Timely maintenance; The machine has the function of automatically making the grinding marks, the touch screen sets the width of the grinding marks, and puts the board automatically to make the grinding marks; Machine is equipped with ENCODER automatically calculate the length of each board and board position, no need to enter the production board size, the same thickness of the production board With the size of the board can be directly cross; Machine with automatic / manual transfer function, optional automatic adjustment of the board, without manual operation; No plate automatic standby water saving function and abnormal detection device. Working width: 750mm Grinding board size: 650mm * 650mm (max) 250 mm * 250mm (min) Plate thickness: 0.1~3.2mm (option:12mm) Conveying speed: 0.0~5.0m/min

More

Horizontal chemical ..

According to customer's different process requirement, make the equipment and equipment capability to meet the production requirement; The cleaning process is suitable for various chemical processes; Remove the plate grease and impurity ion pollution; Chinese operator interface, the program can be customized according to customer requirements, with human nature, friendly alarm display function, the specific issues at a glance, Convenient operation and maintenance; Machine with automatic / manual transfer function, optional automatic adjustment of the board, without manual operation; No plate automatic standby water saving function and abnormal detection device. Working width: 750mm Grinding board size: 650mm * 650mm (max) 35 mm * 35mm (min) Plate thickness: 0.05~3.2mm (option:12mm) Conveying speed: 0.0~5.0m/min

More
ABOUT US
About us

Shenzhen Ching King Electronic Co.ltd . is a manufacturing, trading, marketing of an integrated company, we have been committed to providing quality PCB industry Equipment and related parts, repair, maintenance and technical support services. Have a good pre-sales technical support and design development, production, maintenance in one of the Professional team, with good equipment and processing conditions, self-development and improvement of a variety of high-performance machines, spare parts, we can use the professional advantages and comprehensive energy Force, to provide customers with new equipment, renovation, transformation and better services.
Equipment: Electromagnetic melt machine (CCD / PIN), PP automatic punching machine, copper drilling machine, PP cutting machine, 

More

NEWS CENTER
News
【company news】
[NULL]
2019-3-11
【company news】
[NULL]
2019-3-14
【company news】
[NULL]
2019-3-6
【company news】
Shenzhen Jing Jin Electronics Co., Ltd. ..
2016-8-4
【Show information】
Shenzhen ChingKing Electronics Co., Ltd.
2016-10-8
【Show information】
[NULL]
2019-3-2


WeChat


Weibo

Copyright © Shenzhen Ching King Electronic Co.ltd 粵ICP備08121982號
bbin电子游戏贴吧
捕鱼棋牌送38彩金可提现 靠谱的老时时玩法 pk10一期五码计划 福彩幸运农场走势图表 3d开机号走势 极速时时 广东快乐十分走势图和值 平码开奖走势图 欢乐生肖怎么买 广东时时11选五开奖结果走势图 福利彩票双色球开奖结果 福建快3遗漏数据速查 高手论坛ApP 福建福彩走势 3d彩宝网500期开奖结果 2018年永久平特肖公式